How to Mount Your Ring Doorbell Without Drilling: The Ultimate No-Drill Installation Guide for Renters and Homeowners

Installing a Ring Video Doorbell is one of the easiest ways to boost your home security and stay connected with who’s at your front door. But not everyone wants to drill holes—especially if you’re renting an apartment, living in a condo, or simply don’t want to damage your home’s exterior.

Fortunately, Ring offers no-drill mounting options that allow you to install your device without screws, wall anchors, or a drill. These adhesive or bracket-based methods are secure, damage-free, and just as effective in most everyday situations.

In this guide, you’ll learn how to mount your Ring Doorbell without drilling, which tools you’ll need, what to watch out for, and how to troubleshoot common issues.

For more reviews, guides, and smart home deals, don’t forget to check out our Ring Video Doorbell hub.

Contents

1 Step-by-Step Instructions: How to Mount a Ring Doorbell Without Drilling
2 Real-World Use Cases
3 Checklist for No-Drill Ring Doorbell Installation
4 Fixes for Common Mounting Problems
5 Watch Out For
6 Pro Tips for Better No-Drill Mounting
7 Recommended Affiliate Link
8 Frequently Asked Questions (FAQs)
9 Looking for Technical Resources

Step-by-Step Instructions: How to Mount a Ring Doorbell Without Drilling

Step 1: Choose a No-Drill Mounting Plate

You’ll need a no-drill mounting bracket or adhesive mount that’s compatible with your specific Ring model (e.g., Ring Battery Doorbell Plus, Ring Video Doorbell 2nd Gen, etc.).

Recommended option:
Ring No-Drill Mount on Amazon

This mount uses a strong adhesive backing to attach your doorbell to flat surfaces like glass, metal, or painted wood without tools.

Step 2: Clean the Mounting Surface

Clean the area where you’ll attach the mount:

Use rubbing alcohol or mild soap and water
Make sure the surface is dry and free of dust or grease

Why this matters: Adhesive strength depends heavily on surface cleanliness. Avoid mounting on brick, stucco, or textured siding unless you’re using heavy-duty outdoor tape.

Step 3: Mark the Placement

Position the mount about 48 inches (4 feet) from the ground. This is the optimal height for capturing faces and packages while keeping the motion detection accurate.

Use painter’s tape to temporarily place the mount and test the Ring’s camera angle through the app.

Step 4: Attach the No-Drill Mount

Peel off the adhesive backing. Firmly press the mount onto the surface and hold for at least 60 seconds.

Pro tip: Let the adhesive cure for at least 24 hours before attaching the doorbell. This gives the bond time to reach full strength.

Step 5: Snap the Ring Doorbell into the Mount

Once the mount is set:

Insert your fully charged battery into the Ring Doorbell
Slide the device into the no-drill bracket
Secure it using the bottom latch or tamper-resistant screw (if included)

Open the Ring app to confirm the camera angle and connectivity.

Real-World Use Cases

Apartment Installations
A college student in Boston used a no-drill mount on a metal door in their off-campus apartment. It provided a clear view of the hallway and helped them monitor packages and visitors.

Rental Properties
A renter in San Diego used a removable adhesive mount on their painted door frame. Upon moving out, they simply removed the mount without damaging the trim.

Glass Surfaces
A homeowner in Phoenix used a Ring adhesive mount to install their doorbell on a glass side panel next to their front door. No screws, no drilling, and no permanent changes.

Checklist for No-Drill Ring Doorbell Installation

Compatible Ring model (check dimensions and weight)
No-drill mount or adhesive bracket
Rubbing alcohol or cleaning wipes
Smooth, flat, clean surface (metal, glass, painted wood)
Fully charged Ring battery
Time to let adhesive cure (preferably 24 hours)
Smartphone with Ring app installed

Fixes for Common Mounting Problems

Issue: Mount Won’t Stick

Clean the surface again and ensure it’s completely dry
Apply pressure longer (try 2–3 minutes)
Use industrial-strength outdoor mounting tape as a backup

Issue: Doorbell Falls Off

You may be using a mount rated for indoor use
Check the weight limit of the mount versus your Ring model
Consider switching to a bracket that clamps or uses reusable adhesive gel

Issue: Uneven or Textured Surface

Use an adapter plate or apply adhesive tape only on flat contact points
You may need to switch to a clamp-style mount designed for railings or fences

Watch Out For

Hot Weather or Direct Sunlight
Extreme heat can weaken adhesive. If you live in the South or Southwest U.S., try placing the mount in a shaded area or choose a mount rated for high temperatures.

Heavy Rain or Moisture
Even waterproof mounts can weaken on wet surfaces. Make sure the mount is installed during dry weather and protected from rain afterward.

Not Compatible with All Ring Models
The Ring Video Doorbell Pro and Elite require hardwiring and aren’t ideal for no-drill mounting. Stick to battery-powered models like the Ring Video Doorbell 2, 3, 4, or Battery Plus.

Pro Tips for Better No-Drill Mounting

Use Outdoor-Rated Adhesive Tape
Brands like 3M and Gorilla offer weatherproof tape strong enough to support smart doorbells.
Buy a Spare Mount
If you ever move, having a backup lets you reinstall your doorbell without repurchasing everything.
Use Mounting Wedges
Need a better camera angle? Add a no-drill angle mount to tilt your doorbell left, right, up, or down.
Test Wi-Fi Signal Before Final Placement
Make sure your doorbell gets a strong signal in the mounting location. Check the Ring app’s Device Health for signal strength (RSSI closer to -30 is better).
Use Anti-Theft Covers
Some no-drill mounts come with tamper-resistant screws or lock boxes to deter theft.

Frequently Asked Questions (FAQs)

Q1. Can I really mount a Ring Doorbell without any screws or tools?
Yes. With the right no-drill mount or adhesive bracket, you can securely install your Ring device without drilling into walls or door frames.

Q2. Will the adhesive hold up in bad weather?
Most adhesive mounts are weather-resistant but may struggle in extreme heat or constant rain. Always check the product specs and consider adding weatherproof backing tape.

Q3. Is no-drill mounting secure enough for long-term use?
Yes, if installed correctly on a flat surface and allowed to cure. Some mounts even include anti-theft features for extra protection.

Q4. Will this void my lease or rental agreement?
No-drill mounts are designed specifically for renters. They don’t damage paint, wood, or structure, so you can remove them cleanly when you move out.

Q5. Can I reuse the adhesive mount later?
It depends on the product. Some mounts are reusable with new adhesive strips, while others are one-time-use only.

If you’re looking to improve your home security without damaging your door or violating your lease, mounting your Ring Doorbell without drilling is the perfect solution. With a strong no-drill bracket and a clean, smooth surface, you can have your smart doorbell up and running in minutes.

This method is ideal for renters, apartment dwellers, and homeowners who want flexibility. And the best part? You get all the features of the Ring system—motion detection, live view, two-way talk—without a single hole in your wall.

Looking for Technical Resources

How to Mount Your Ring Doorbell Without Drilling: The Ultimate No-Drill Installation Guide for Renters and Homeowners