Home - How to guide - How to Replace the Battery in Your Ring Doorbell
How to guide

How to Replace the Battery in Your Ring Doorbell

SmartHomes SmartHomes
December 12, 2025
2210 Views

The Ring Video Doorbell has become one of the most popular smart home devices across the United States. With features like motion detection, two-way talk, and real-time notifications, it’s a must-have for homeowners and renters who value security and convenience.

However, for battery-powered models like the Ring Video Doorbell 2, 3, 4, or Battery Doorbell Plus, there’s one important task you can’t skip—replacing the battery when it runs low.

In this guide, you’ll learn everything you need to know about replacing the battery in your Ring Doorbell, from recognizing when it’s time for a change to best practices for battery care.

For more guides and expert recommendations, visit our dedicated Ring Video Doorbell page.

How to Replace the Battery in Your Ring Doorbell

Checklist for Ring Doorbell Battery Replacement

  • Ring screwdriver or compatible Torx T15 tool
  • Charged Ring Quick Release Battery Pack
  • Clean workspace
  • Ring app installed on your smartphone
  • Secure place to store screws and faceplate
  • Optional: Extra battery for uninterrupted service
How to Replace the Battery in Your Ring Doorbell
Check Battery Status in the Ring App
Open the Ring app and select your device. Tap Device Health to view the battery percentage. If it’s below 20 percent or showing as “Very Low,” it’s time to recharge or replace the battery.

Pro Tip: Replace the battery before it completely dies to avoid losing video history or device connection.
Gather Your Tools
1. Ring screwdriver (included with most models)
2. Fully charged Ring Quick Release Battery Pack
3. Optional: Extra battery for hot-swapping
Remove the Faceplate
1. Use the screwdriver to remove the bottom security screw
2. Slide the faceplate up and off the doorbell unit
Make sure you store the screw safely, as it’s essential for securing the unit after reassembly.
Release the Old Battery
1. Press the silver tab at the bottom of the battery and slide it out of the compartment.
2. If you only have one battery, charge it using the included micro-USB cable. Charging to 100% typically takes 5 to 10 hours.
3. If you have a second battery, insert the fresh one immediately and skip the wait.
Insert the Charged Battery
Once charged, slide the battery back into the compartment until it clicks. A small LED light should blink briefly to confirm the connection.
Reattach the Faceplate
Slide the faceplate back into place from the top down. Secure it by replacing the screw at the bottom.
Confirm in the Ring App
Open the Ring app and go to your device’s settings. Check Device Health to ensure the battery is now showing a full charge.

Fixes for Common Battery Issues

Battery Won’t Charge

  • Try a different USB cable and power adapter
  • Make sure you’re using a wall outlet (not a USB hub)
  • Check for dirt or debris on charging contacts

Battery Dies Too Quickly

  • Reduce motion sensitivity in the Ring app
  • Turn off advanced motion detection features
  • Make sure your Wi-Fi signal is strong; weak signals drain the battery faster

Ring Doorbell Not Detecting Battery

  • Remove the battery, wait 10 seconds, then reinsert it
  • Perform a soft reset by holding the setup button for 15 seconds
  • Update the Ring app to the latest version

Watch Out For

Faceplate Damage
Never force the faceplate back on. If it doesn’t slide easily, double-check alignment.

Using Non-Official Batteries
Only use Ring-branded or certified batteries. Third-party options may be cheaper but can void warranties and compromise performance.

Letting Battery Fully Die Repeatedly
Frequent deep discharges can shorten battery lifespan. Recharge at around 20% to maintain long-term health.

Incorrect Model Battery
Different Ring models use slightly different batteries. Make sure the replacement matches your specific Ring model.

Pro Tips for Smooth Battery Replacements

  1. Invest in a Spare Battery
    Having a second battery saves time and keeps your device online without waiting hours for charging.
  2. Label Batteries
    If you use multiple batteries, add a piece of tape or sticker to track usage cycles and performance.
  3. Set Reminders
    Add a battery check to your calendar every 2–3 months depending on usage and climate.
  4. Charge Indoors Only
    Avoid charging batteries outdoors in hot or cold weather. Always bring them inside for safe charging.
  5. Use Ring’s Solar Charger (Optional)
    If you want to reduce manual charging, the Ring Solar Charger keeps your battery topped off in sunny climates. However, it may not fully replace manual charging in high-traffic zones.

If you’re looking for a reliable replacement or spare battery, here’s our top recommendation:

9.4
Ring Rechargable Battery

Ring Rechargeable Quick Release Battery Pack Best Values

Works with Ring Video Doorbell 2, Video Doorbell 3, Video Doorbell 3 Plus, Video Doorbell 4, Battery Doorbell Plus, Battery Doorbell Pro, Stick Up Cam Battery/Solar (all gens), Stick Up Cam Pro Battery/Solar, Spotlight Cam Battery/Solar, Spotlight Cam Plus Battery/Solar/Wired, Spotlight Cam Pro Battery/Solar/Wired, Peephole Cam, Solar Floodlight.
$69.98 Buy this item Read full review
Disclaimer: As an Amazon Associate, we earn from qualifying purchases

Compatible with most Ring Battery Doorbells, this official battery ensures performance, safety, and a perfect fit.

To explore more Ring accessories and installation tips, visit our full Ring Video Doorbell guide.

Real-World Use Cases

Busy Parents in Suburbia
A family in Ohio keeps two Ring batteries on rotation. While one charges inside, the other stays in the device. They never miss a delivery or security alert.

Retired Couple in Florida
They mounted their Ring Battery Doorbell near the back patio. Every two months, they remove the battery, charge it overnight, and reinsert it the next morning—quick and simple.

Apartment Dwellers in New York City
With no access to wired power, renters rely on the battery-powered Ring for security. They replace the battery quarterly and keep a spare on hand to avoid downtime.

Frequently Asked Questions (FAQs)

Q1. How often do I need to replace the Ring Doorbell battery?

On average, once every 2–3 months. However, it can vary based on usage, weather, and motion settings.

Q2. Can I use third-party batteries for Ring?

Technically yes, but it’s not recommended. Official Ring batteries are tested for safety and compatibility. Using unofficial ones may void your warranty.

Q3. How do I know when the battery is fully charged?

While charging, a red/green light will flash. When it’s solid green, the battery is fully charged and ready for use.

Q4. My Ring still shows low battery after charging. What should I do?

Try restarting the Ring app or removing and reinserting the battery. If the issue persists, reset your device or contact Ring support.

Q5. Can I charge the battery without removing it from the Ring Doorbell?

Only if your doorbell is hardwired or connected to a solar panel. Otherwise, the battery must be removed for charging.

Replacing the battery in your Ring Doorbell is a quick and simple process, but doing it right ensures that your device stays online and your home remains protected. Whether you’re a homeowner in the suburbs or renting a city apartment, maintaining your Ring Doorbell battery is crucial for uninterrupted smart home security.

By following this guide, you’ll never be caught off guard by a dead battery again. Want to make life even easier? Keep a second battery on hand so you can always be just one quick swap away from full protection.

For more step-by-step instructions, smart home gear tips, and Ring product recommendations, explore our complete Ring Video Doorbell resource page.

Looking for Technical Resources

Related Articles

Affiliate Disclaimer

Some of the links on this website are affiliate links. This means that if you click on a link and make a purchase, we may earn a small commission at no extra cost to you. This helps support our work and allows us to continue providing helpful content.

We only recommend products and services that we trust and believe will add value to our readers.

Thank you for your support!